This clever tool installs and removes the plastic clips which hold moulding strips. Just press down and slide clip on or off. Helps avoid scratches on new finishes or injury to worker’s hand.

A useful tool designed to save time and money.

It makes this job so easy.

Copper coated hog rings. 14 wire gauge with sharp points.

These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

Approximate rings per box: 1,000

Copper coated hog rings. 14 wire gauge with blunt points.

These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

Approximate rings per box: 1,000

A fine quality pressed steel frame revolving punch with drive tubes. All tubes are heat treated to give long wear.

Furnished with tubes sizes: 0  (5/64”), 1 (3/32”), 2 (7/64”), 3 (1/8”), 4 (5/32”) & 6 (3/16”).

Copper coated hog rings. 14 wire gauge with sharp points.

These hog rings are used with CSO773-HRP Hog Ring Pliers. They can also be set with series CSO1440 as well.

Approximate rings per box: 1,000

Arch punch 1/4"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 3/8"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 1/8"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 3/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 5/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 7/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 1/2"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Made with a special formula of resilient vinyl, these tough cutting pads are designed for use with punches. They are long wearing and can be used on both sides. Cutting pads should be used on a solid base for best results. The semi-self healing surface absorbs cuts and helps prevent damage to the cutting edge of the punch.

It can be used on both sides for longer durability.

Arch punch 5/8"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

This sturdy quality tool is specially designed for rapid closing of 1/4 “ cushion spring (two 8 gauge wire) clips. Contoured handle with vinyl grips provide comfort and firmness.

Hardened and tempered. Forged steel. Vinyl handles. Closing spring loaded. Works with hog rings series 773. It can also close hog rings series 1442 & 1443 & 1444. Ideal for closing around small areas.
Overall Length: 7-1/8"

Arch punch 9/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 11/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 3/4"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 7/8"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 13/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 1"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Arch punch 15/16"

Forged in one piece from the finest special carbon steel. A unique feature of the arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching.

Nickel plated.

A special plier used for applying edge wire clips to edge wire and springs.  

This pliers set our 3 prong clips CSO4450-3.